| |
TECHNICAL SPECIFICATIONS |
| Electrical
Rated Power: |
130W rms. Into 8 ohms, 260W rms into 4 ohms, continuous both channels driven. |
| Distortion: |
Less than 0.05% THD at rated power and 20KHz. (into 4-8 ohms) |
| Signal to Noise : |
Better than 130dB ( A weighted ) at full power |
| Frequency response :
|
0.5 Hz to 48KHz +0,-3dB
5 Hz to 30KHz +0, -0.5dB |
| Power consumption : |
Max 800 Watts |
| Fuse rating : |
10A T-Type |
| Protection : |
Fully electronic on short circuit output, or continuous overload and / or clipping. |
| Sensitivity : |
26dBV |
| Gain : |
12dB preamp section – 26dB amplifier section – 38dB Total Max. |
| Phase : |
Non inverting, ref XLR pin 2(+) or phono input.
|
| Mechanical
Input sockets :
|
1 x pair of XLR for balanced line operation
4 x pair of RCA phono for single ended operation
1 x 3.5mm Jack input on front panel |
| Output sockets : |
2 x WBT-0780 4mm binding posts per channel.
1 x Pair of XLR for Balanced Pre-Amp Output.
1 x Pair of RCA Phono for Recording Monitor Output. |
| Finish : |
Bead Blasted anodized aluminium alloy casework, glass lens integral Base vibration control system. Power on / off switch and indicator. Filtered IEC mains input socket. |
| Weight : |
21Kg |
| Size : |
437 x 100 x 300 mm ( WxHxD ) |
